Compuprint 4247-Z03 - Manual (Page 31)

Connecting the power cord
Do not connect the power cord until the “Performing a power-receptacle
safety-check” on page 3 has been successfully completed.
DANGER
<1-11> Your country may require an approved power cord and plug.
Ensure that you have the correct power cord and plug. Use this cord and
plug only with an approved, correctly-installed power receptacle.
“Portable power strip receptacles (temporary power taps)” on page xii, conforming
to all requirements, may be used.
Connect the power cord to the outlet and printer.
Figure 20. Connecting the power cord
Chapter 1. Getting Started 15