Compuprint 4247-Z03 - Manual (Page 69)

Power-on paper source
The Power-On Paper Source allows you to select which paper source is to be used
when the printer is turned on. The Last Used value means that the paper source
used before the printer was turned off is to be used as the power-on paper source.
You can change the Power-On Paper Source to:
v
Front (Default)
v Rear
v Last Used
Selecting Last Used causes the Paper Source parameter (in the Printer Setup menu)
to be updated whenever the data stream selects a paper source. If the data stream
attempts to select the operator panel setting for power-on paper source, the most
recently selected paper source will be used instead.
To change or check the power-on paper source, follow these steps:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Configuration Storage
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Configuration Storage
Power-On Paper Source
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired Power-on
Paper Source value is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected paper source.
8. Use START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Chapter 4. Configuration storage 53