Comtech EF Data CLO-10 - Manual (Page 121)

CLO-10 Link Optimizer Revision 1
Remote Control MN/CLO-10.IOM
B.6.2 Remote Commands and Queries For the CLO-10 Link Optimizer
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for
Command or
Response to
Query
Description of Arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Uplink Frequency UFQ= 9 bytes Command or Query.
50 to 90/100 and 180 MHz (70/140 MHz units)
Resolution = 100 Hz
Example: UFQ=0070.0000
UFQ=
UFQ?
UFQ*
UFQ#
UFQ^
UFQ@ UFQ? UFQ=xxxx.xxxx
(see description of
arguments)
Downlink
Frequency RFQ= 9 bytes Command or Query.
50 to 90/100 and 180 MHz (70/140 MHz units)
Resolution = 100 Hz
Example: RFQ=0070.0000
RFQ=
RFQ?
RFQ*
RFQ#
RFQ^
RFQ@ RFQ? RFQ=xxxx.xxxx
(see description of
arguments)
Remod Frequency TFQ= 9 bytes Command or Query.
50 to 90 and 100 to 180 MHz (70/140 MHz units)
Resolution=100 Hz
Example: TFQ=0070.0000
TFQ=
TFQ?
TFQ*
TFQ#
TFQ^
TFQ@ TFQ? TFQ=xxxx.xxxx
(see description
arguments)
Remod Output
Enable TXO 1 byte value.
0, 1 Command or Query.
1 = Enable the remodulation output
0 = Disable the remodulation output
Example: TXO=1 – Turn the remodulation output on
TXO=
TXO?
TXO*
TXO#
TXO^
TXO@ TXO TXO=x
Remod Output
Attenuation TAT 1 byte value.
0 to 31.5 dB Command or Query.
0 to 31.5 dB output attenuation in 0.5 dB steps
Example: TAT=25.5
TAT=
TAT?
TAT*
TAT#
TAT^
TAT@ TAT TAT=xx.x
B-9