Comtech EF Data CLO-10 - Manual (Page 129)

CLO-10 Link Optimizer Revision 1
Remote Control MN/CLO-10.IOM
B-17
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to Controller)
Number of Unread
Stored Events N/A 3 bytes Query only.
Unit returns the number of stored Events, which remain
Unread, in the form of xxx.
Note: This means unread over the remote control.
Example: NUE=126
N/A NUE? NUE=xxx
(see description of
arguments)
Retrieve next 5
unread stored
Events N/A 80 bytes Query only.
Unit returns the oldest 5 Stored Events, which have not
yet been read over the remote control. Reply format:
{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-
body{CR}Sub-body{CR}, where:
Sub-body = ABCCddmmyyhhmmss:
A being the fault/clear indicator, where:
F=Fault
C=Clear
I =Info
B being the fault type, where:
1=Unit
2=Uplink
3=Downlink
4=Remod
5=Power ON/OFF, or log cleared
CC being the Info Code, where:
0=Power Off
1=Power On
2=Log Cleared
3=Global Config Change
4=Reserved
CC Fault Code numbers, as in FLT? (See FLT Query)
If there are less than 5 events to be retrieved, the
remaining positions are padded with zeros. If there are
no new events, the response is RNE*.
N/A RNE? RNE=
{CR}ABCCddmmyyhhmm
ss{CR}ABCCddmmyyhhm
mss{CR}ABCCddmmyyhh
mmss
{CR}ABCCddmmyyhhmm
ss{CR}ABCCddmmyyhhm
mss
(see description of
arguments)