Comtech EF Data CLO-10 - Manual (Page 126)

CLO-10 Link Optimizer Revision 1
Remote Control MN/CLO-10.IOM
B-14
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for
Command or
Response to
Query
Description of Arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Clear All Stored
Events CAE= None Command only.
Forces the software to clear the software events log.
Example: CAE=
Note: This command takes no arguments.
CAE=
CAE?
CAE*
CAE#
CAE^ N/A N/A
Initialize Events
Pointer IEP= None Command only.
Resets internal pointer to allow RNE? Queries to start at the
beginning of the stored events log.
IEP=
IEP#
IEP^ N/A N/A
Circuit ID String
(valid only in FW
Ver. 1.2.1 or later) CID= 28 bytes Command or Query.
Sets or queries the user-defined Circuit ID string which is a
fixed length of 28 characters.
Valid characters include:
[Space] ( ) * + - . / 0-9 A-Z
CID=
CID?
CID*
CID#
CID^ CID? CID=
xxxxxxxxxxxxxxxxxx
xxxxxxxxxx
(see description of
arguments)