A.3 description of modules – Comtech EF Data CLO-10 User Manual
Page 89
![background image](/files/778761/content/doc089.png)
CLO-10 Link Optimizer
Revision 1
Redundant System Operation
MN/CLO-10.IOM
A.3
Description of Modules
The CLO-10 can be equipped with one of two possible modules: the Input/Output Module (IOM),
or the Input/Output Switch Module (IOSM).
A.3.1.1 Overview: CLO-10 with Input/Output Module (IOM)
The CLO-10 with the Input/Output Module (IOM) can be used in two different configurations:
• As a Standalone Traffic Unit (without Daisy Chain Redundancy).
• As the Redundant Unit (for use within the Daisy Chain Redundancy).
Figure A-3 shows the IOM; Figure A-4 shows the functional block diagram of the IOM as it
operates in tandem with the CLO-10 Main Card (installed in the CLO-10 chassis).
Figure A-4. IOM (CEFD P/N PL/12833-1)
Figure A-5. CLO-10 With IOM – Block Diagram
A–5