Comtech EF Data CLO-10 - Manual (Page 24)

CLO-10 Link Optimizer Revision 1
Preface MN/CLO-10.IOM
Safety Compliance
EN 60950
Applicable testing is routinely performed as a condition of manufacturing on all units to ensure
compliance with safety requirements of EN60950.This equipment meets the Safety of
Information Technology Equipment specification as defined in EN60950.
Low Voltage Directive (LVD)
The following information is applicable for the European Low Voltage Directive (EN60950):
<HAR> Type of power cord required for use in the European Community.
!
CAUTION: Double-pole/Neutral Fusing
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung
International Symbols:
Symbol Definition Symbol Definition
~
Alternating Current
Protective Earth /
Safety Ground
Fuse Chassis Ground
NOTE
For additional symbols, refer to Cautions and Warnings listed earlier in this Preface.
Applicable testing is routinely performed as a condition of manufacturing on all units
to ensure compliance with safety requirements of EN60950.
xiv