Recommended standard designations, Safety and compliance, Electrical safety and compliance – Comtech EF Data CRS-300 User Manual

Page 21: Electrical installation, Operating environment

Advertising
background image

CRS-300 1:10 Redundancy Switch

MN/CRS300.IOM

Preface

Revision 19

xix

Recommended Standard Designations

The Electronic Industries Association (EIA) designations supersede the Recommended Standard

(RS) designations. References to the old designations may be shown when depicting actual text

(e.g., RS-232) displayed on Web Server pages, serial remote interfaces, Telnet Command Line

Interfaces (CLIs), or unit rear panels. All other references in the manual refer to EIA

designations.

CAUTION – You should carefully review the following information.

Safety and Compliance

Electrical Safety and Compliance

The unit complies with the EN 60950 Safety of Information Technology Equipment (Including

Electrical Business Machines) safety standard.

CAUTION – IF THE UNIT IS OPERATED IN A VEHICLE OR MOVABLE INSTALLATION,

MAKE SURE THE UNIT IS STABLE. OTHERWISE, EN 60950 SAFETY IS NOT GUARANTEED.

Electrical Installation

CAUTION – CONNECT THE UNIT TO A POWER SYSTEM THAT HAS SEPARATE GROUND,

LINE AND NEUTRAL CONDUCTORS. DO NOT CONNECT THE UNIT WITHOUT A DIRECT

CONNECTION TO GROUND.

Operating Environment

CAUTION – DO NOT OPERATE THE UNIT IN ANY OF THESE EXTREME OPERATING

CONDITIONS

AMBIENT TEMPERATURES LESS THAN 0° C (32° F) OR MORE THAN 50° C (122° F).

PRECIPITATION, CONDENSATION, OR HUMID ATMOSPHERES OF MORE THAN 95%

RELATIVE HUMIDITY.

UNPRESSURIZED ALTITUDES OF MORE THAN 2000 METRES (6561.7 FEET).

EXCESSIVE DUST.

FLAMMABLE GASES.

CORROSIVE OR EXPLOSIVE ATMOSPHERES.

Advertising