Comtech EF Data CRS-300 - Manual (Page 68)

CRS-300 1:10 Redundancy Switch MN/CRS300.IOM
Switch Connectors and Pinouts Revision 19
3–14
3.2.2.10 Quad E1 Connectors, RJ-48F (CRS-365)
See Table 3-13 for the RJ-48F connector pinouts for the Quad E1 User Data Interface – Ports 1
through 4 on the CRS-365 TMI.
Table 3-13. Quad E1 Connector Pinouts (Typical Ports 1 through 4)
Pin
Signal Function
(where Port # = Port 1, 2, 3 or 4)
Direction
1 Port # Tx(+) In
2 Port # Tx– In
3 Ground --
4 Port # Rx(+) Out
5 Port # Rx– Out
6 Ground --
7 NC --
8 NC --