Comtech EF Data FX Series Administrator Guide - Manual (Page 113)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 113
Chapter: FX Series Status
Section: QOS Status Monitor
MN-FXSERIESADM6 Rev 5
Throughput Statistics
This is a recording of FX Series ADC throughput statistics based on current statistics since either the last
time that the statistics were cleared or the configured “throughput statistics interval” has elapsed. The
“delta” value in the upper-left corner of the report indicates the number of seconds that elapsed in the
throughput interval. A snapshot of the current statistics was taken “delta” seconds ago; each counter in
this snapshot is then subtracted from corresponding counter in the “current statistics”. The remainders
are then divided by the “delta” value to yield throughput values on a “per second” basis. It is possible
that some of the values in the report are negative, meaning that a counter declined at a certain rate (for
example CPU utilization may go down) over the throughput interval. The size of the throughput log file is
relatively constant.
Port Statistics:
This provides summary traffic counters for each port definition
WCCP Status:
This provides a summary status of all of the service groups that the ADC is a member of. This report
includes redirection maps and other important counters.
ACM QoS:
By VSAT Modem:
This report provides a summary status of the satellite modems if modem polling is enabled. Also
provides a summary of filter matches.
Throughput by QoS Queue:
This report provides a real time view of vital QoS statistics, including current, average and
elapsed stats.
Routes:
This report shows a detailed list of all the routes that are currently in use on this ADC on all route tables.