Comtech EF Data FX Series Administrator Guide - Manual (Page 15)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 xv
Chapter: Using This Document
Section: Conventions and References
MN-FXSERIESADM6 Rev 5
Conventions and References
Metric Conversion
Metric conversion information is located on the inside back cover of this manual. This information is provided
to assist the operator in cross-referencing non-Metric to Metric conversions.
Recommended Standard Designations
Recommended Standard (RS) Designations have been superseded by the new designation of the Electronic
Industries Association (EIA). References to the old designations may be shown when depicting actual text
displayed on the Web Server (HTTP) or Command Line Interface pages for the FX Series appliance).
Trademarks
Product names mentioned in this manual may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged.
Environmental
The FX Series Appliance must not be operated in an environment where the unit is exposed to extremes of
temperature outside the ambient range 0° to 50°C (32° to 122°F); precipitation, condensation, or humid
atmospheres above 95% relative humidity; altitudes (unpressurized) greater than 2000 meters; excessive
dust or vibration; flammable gases; or corrosive or explosive atmospheres. Operation in vehicles or other
transportable installations which are equipped to provide a stable environment is permitted. If such vehicles
do not provide a stable environment, safety of the FX Series appliance may not be guaranteed.