Comtech EF Data FX Series Administrator Guide User Manual
Page 141
![background image](/files/778805/content/doc141.png)
Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1
141
Chapter: FX Series Operations Features
Section: Packet Capture
MN-FXSERIESADM6 Rev 5
Capture Actions
After the common parameters have been “Saved”, you can click the “start” or “stop” buttons
associated with the capture interfaces that have been defined.
Download Traces
After stopping the packet captures, click the “Download Traces” button to invoke a log collection
process that will zip up the packet captures and also an assortment of event tracing logs. The
captures in the “.zip” file will have names that end in either “.pcap0” or “.pcap1”.
Sample Capture Filters
host 10.1.1.1
Records only traffic for which either source or destination is 10.1.1.1
tcp port 443
Records only traffic for which either source or destination is port 443
tcp port 443 and host 10.1.1.1
Records only traffic that has source/dest port 443 AND also has source/dest of 10.1.1.1