Comtech EF Data FX Series Administrator Guide - Manual (Page 63)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 63
Chapter: FX Series Network Settings
Section: LAN Interfaces
MN-FXSERIESADM6 Rev 5
To enter information, log into the appliance username: comtech password: comtech
Select Option “1 Configure Appliance”
Select Option”5 Configure SNMP“
The wramp SNMP configuration wizard Option 6 now prompts for destination 'trap' community and
'read/write' community. (Previous MIB was not read/write and did not emit traps (traps are an SNMP
term for alerts))
Figure 4-6 FX Series SNMB Configuration Screen