Comtech EF Data FX Series Administrator Guide - Manual (Page 42)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 42
Chapter: Overview - FX Series
Section: FX Series Appliances Data Sheet
MN-FXSERIESADM6 Rev 5
Rear Panel
Figure 1-9 FX Series FX-1005 Rear Panel
Reset Switch
Use a pointed object to press the reset button to reboot the system without turning off the power.
Console Port
By using suitable rollover cable (also known as Cisco console cable), you can connect to a computer
terminal for diagnostic or configuration purpose
Two USB 2.0 Ports
It connects to any USB devices, for example, a flash drive
4 Gigabit LAN ports
Using suitable RJ-45 cable, you can connect FX Series 1005 System to a computer, or to any other
piece of equipment that has an Ethernet connection; for example, a hub or a switch. Moreover,
LAN3-LAN4 are configured as LAN Bypass when failure events occur.
1) (MGT) Management
2) (AUX) Auxiliary
3) (LAN)
4) (WAN)
DC-in 12V Jack
The system requires a 60W/12V power adapter with lock.
Power-on Switch
It is a switch to turn on or off the power.
Summary of Specifications
Network Interface /Fail to Wire
Power Supply – UL Approved
(4) GbE ports, (1) pair bypass
200 W (Auto 100V – 200V)
System Subscription 1 Year of hardware/software support, maintenance and updates