Comtech EF Data FX Series Administrator Guide - Manual (Page 53)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 53
Chapter: FX Series Network Settings
Section: Standard Network Configuration Overview
MN-FXSERIESADM6 Rev 5
4 FX Series Network Settings
Figure 4-1 FX Series Standard Configuration Screen
4.1 Standard Network Configuration Overview
The following network screens provide common interfaces for the FX Series appliances.
Application Policies
Customize the optimization techniques that will apply to your enterprise applications.
(See the Optimization Acceleration Settings in Section 8 below).
FX Series Basic Network Interfaces
Define network settings for management and auxiliary interfaces.
FX Series General Settings
The General Settings control the method of traffic interception and WCCP. In addition, this
section includes settings to configure basic HTTP settings, system time and software updates of
FX-Remotes. See Specific Sections below.
FX Series ADC Specific Settings Section
FX Series Remote Specific Settings Section
FX Series Redundancy
Configure a Redundancy cluster that can share a common configuration.
FX Series Host Settings
Configure the host name and DNS settings to facilitate management and time synchronization.
FX Series In-Path Interfaces
For FX Series ADC see: Configure network settings for the interfaces for user data.
For FX Series Remote In-Path Interfaces see: FX Series Remote Specific Settings Section .
FX Series LAN Interfaces
Set speed, MTU and VLAN options of the physical LAN interfaces. .
FX Series Multicator Settings
Configure reliable multicast fan-out settings.