Comtech EF Data FX Series Administrator Guide - Manual (Page 123)

Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.1.1 123
Chapter: FX Series Optimization Settings
Section: Configure Application Policies
MN-FXSERIESADM6 Rev 5
Client Type:
This field allows you to specify that client types that are associated with this authorization realm.
The valid choices are:
Native – HTTP traffic which is not accelerated by a Plug-In
FX-Remote – Traffic which is accelerated by the FX Series Remote Appliance
NOTE: Press and hold the control key for multiple selections. The default is any client type.
In-Path Interface:
Allows you to designate the authorization realm to only apply to traffic that flows on a particular VLAN.
NOTE: When assessing authorization realm membership, if the appliance determines that if all
of the above field criteria are met, then the user is deemed to be a member of the
authorization realm.
Using Authorization Realms for Testing:
Authorization realms can be useful for testing because they provide a convenient means to stage
deployment of new application policy.
•
You can define an authorization realm with just one IP address – that of a test machine.
•
Then you can enable an application policy and limit the deployment to that authorization
realm.
•
When you are satisfied that further deployment is warranted you can broaden the scope of
the authorization realm for further staging or you may choose to delete the authorization
realm altogether from the policy.