A.3.5 operational commands, A.3.4.5 backup modem fault status, A.3.4.6 firmware version status – Comtech EF Data SMS-758 User Manual
Page 132: A.3.4.7 equipment type
![background image](/files/778880/content/doc132.png)
Remote Control Operation
SMS-758 Modem Protection Switch
A–10
MN/SMS758 Rev. 3
A.3.4.5 Backup Modem Fault Status
Command:
<add/MFS_Bx”cr”
Response:
>add/MFS_Bx”cr”
MOD_yyy”cr”
M
od Status (OK/FLT)
DMD_yyy”cr””lf”]
D
emod Status (OK/FLT)
Where: x = 1 or 2 (backup modem number).
A.3.4.6 Firmware Version Status
Command:
<add/VER_”cr”
Response:
>add/VER_x.xxx”cr””lf”]
Where: x.xxx = Firmware version number.
A.3.4.7 Equipment Type
This command returns the equipment type polled and the software version.
Command:
<add/ET_”cr”
Response:
>add/ET_xxx_yyy”cr””lf”]
Where: xxx = Equipment Type.
A.3.5 Operational Commands
A.3.5.1 Time of Day
Command:
<add/TIME_hh:mmyy”cr”
Response:
>add/TIME_hh:mmyy”cr””lf”]
Status Only:
<add/TIME_”cr”
Response:
>add/TIME_hh:mmyy”cr””lf”]
Where:
hh = hour.
mm = minute.
yy = AM or PM.
Example:
Set switch 67 time to 10:45PM.
Command:
<67/TIME_10:45PM”cr”
Response:
>67/TIME_10:45PM”cr””lf”]