B.3.2 demodulator configuration commands/responses, B.3.1.4 backup modulator active, B.3.2.2 prime demodulator priority – Comtech EF Data SMS-758 User Manual
Page 149
SMS-758 Modem Protection Switch
Remote Control Operation
MN/SMS758 Rev. 3
B–5
B.3.1.4 Backup Modulator Active
Command:
<add/MA_Bx_yyy”cr”
Response:
>add/MA_Bx_yyy”cr””lf”]
Status Only:
<add/MA_Bx”cr”
Response:
>add/MA_Bx_yyy”cr””lf”]
Where:
x = 1 or 2 (backup modulator number).
yyy = YES or NO.
B.3.2 Demodulator Configuration Commands/Responses
B.3.2.1 Prime Demodulator Active
Command:
<add/DA_x_yyy”cr”
Response:
>add/DA_x_yyy”cr”
Status Only:
<add/DA_x”cr”
Response:
>add/DA_x_yyy”cr””lf”]
Where:
x = 1 to 8 (prime demodulator number).
yyy = YES or NO.
B.3.2.2 Prime Demodulator Priority
Command:
<add/DP_x_y”cr”
Response:
>add/DP_x_y”cr””lf”]
Status Only:
<add/DP_x”cr”
Response:
>add/DP_x_y”cr””lf”]
Where:
x = 1 to 8.
y = 1, 2, or 3 (1 is high priority, 2 is medium priority, and 3 is low priority).