Comtech EF Data SMS-758 - Manual (Page 164)

Remote Control Operation SMS-758 Modem Protection Switch
B–20 MN/SMS758 Rev. 3
Character “l”: Demodulator configuration verify fault status character 1.
Bit 6 = 1 always.
Bit 5 = Prime demodulator #1 configuration verify fault.
Bit 4 = Prime demodulator #2 configuration verify fault.
Bit 3 = Prime demodulator #3 configuration verify fault.
Bit 2 = Prime demodulator #4 configuration verify fault.
Bit 1 = Prime demodulator #5 configuration verify fault.
Bit 0 = Prime demodulator #6 configuration verify fault.
Character “m”: Demodulator configuration verify fault status character 2.
Bit 6 = 1 always.
Bit 5 = Prime demodulator #7 configuration verify fault.
Bit 4 = Prime demodulator #8 configuration verify fault.
Bit 3 = Backup demodulator #1 configuration verify fault.
Bit 2 = Backup demodulator #2 configuration verify fault.
Bit 1 = Reserved.
Bit 0 = Reserved.
Character “n”: Modulator compatibility fault status character 1.
Bit 6 = 1 always.
Bit 5 = Prime modulator #1 compatibility fault.
Bit 4 = Prime modulator #2 compatibility fault.
Bit 3 = Prime modulator #3 compatibility fault.
Bit 2 = Prime modulator #4 compatibility fault.
Bit 1 = Prime modulator #5 compatibility fault.
Bit 0 = Prime modulator #6 compatibility fault.
Character “o”: Modulator compatibility fault status character 2.
Bit 6 = 1 always.
Bit 5 = Prime modulator #7 compatibility fault.
Bit 4 = Prime modulator #8 compatibility fault.
Bit 3 = Backup modulator #1 compatibility fault.
Bit 2 = Backup modulator #2 compatibility fault.
Bit 1 = Reserved.
Bit 0 = Reserved.
Character “p”: Demodulator compatibility fault status character 1.
Bit 6 = 1 always.
Bit 5 = Prime demodulator #1 compatibility fault.
Bit 4 = Prime demodulator #2 compatibility fault.
Bit 3 = Prime demodulator #3 compatibility fault.
Bit 2 = Prime demodulator #4 compatibility fault.
Bit 1 = Prime demodulator #5 compatibility fault.
Bit 0 = Prime demodulator #6 compatibility fault.
Character “q”: Demodulator compatibility fault status character 2.
Bit 6 = 1 always.
Bit 5 = Prime demodulator #7 compatibility fault.
Bit 4 = Prime demodulator #8 compatibility fault.
Bit 3 = Backup demodulator #1 compatibility fault.
Bit 2 = Backup demodulator #2 compatibility fault.
Bit 1 = Reserved.
Bit 0 = Reserved.