Comtech EF Data SMS-758 - Manual (Page 133)

SMS-758 Modem Protection Switch Remote Control Operation
MN/SMS758 Rev. 3 A–11
A.3.5.2 Date
Command: <add/DATE_mm/dd/yy”cr”
Response: >add/DATE_mm/dd/yy”cr””lf”]
Status Only: <add/DATE_”cr”
Response: >add/DATE_mm/dd/yy”cr””lf”]
Where:
mm = month.
dd = day.
yy = year.
Example: Set switch 235 date to 11/30/87.
Command: <235/DATE_11/30/87”cr”
Response: >235/DATE_11/30/87”cr””lf”]
A.3.5.3 Mode Command
The Mode Command directs the SMS-758 to enter the specified mode.
Command: <add/MODE_yyyyyy”cr”
Response: >add/MODE_yyyyyy”cr”
Status Only: <add/MODE_”cr”
Response: >add/MODE_yyyyyy”cr””lf”]
Where: yyyyyy = REMOTE, LOCAL, AUTO, or BYPASS.
A.3.5.4 Set Backup Modem Online/Offline
The Modem Online command puts the specified backup modem online for the specified
prime modem.
Note: If “0” is used as the prime modem argument “x”, the specified backup modem is
offline or will be taken offline.
Command: <add/MOL_By_x”cr”
Response: >add/MOL_By_x”cr””lf”]
Status Only: <add/MOL_By”cr”
Response: >add/MOL_By_x”cr””lf]
Where:
y = 1 or 2 (backup modem number).
x = 0 to 8 (prime modem number).