QuickLabel 482 Pronto! - Manual (Page 109)

Pronto! 482/486/682/863 8-19
Contents of Delivery
Check the external rewinder for damage in transit and totality.
Contents of delivery:
• External Rewinder
• Rewind Adapter 2x
• Flange for ER4
• Power Cable
Connecting to Power Supply
The rewinder is equipped with a wide range power unit (100-240V~), so it is
possible to use the printer both with a voltage of 230V~/50 Hz and with a
voltage of 115V~/60 Hz without making changes to the printer.
The rewinder is ready for use, if the power cable (3) supplied in the
accessories is inserted into a power supply connector (2) and the cable is
contacted to a grounded outlet.
Note: Retain packing material for later use.
Warning! Risk of injury by rotating engine parts.
Make sure the power switch (1) is in position “O” (OFF) before connecting the
printer to a power supply! When switching on the Rewinder starts
immediately without or with loose material!