QuickLabel 482 Pronto! - Manual (Page 60)

5-10 Configuration
Status line
Select the parameters (widgets) to be displayed in Ready mode.
The display has a width of 128 pixels. It is not possible to display all widgets
simultaneously. When selecting widgets, only widgets that do not overfill the
display will be available. It may be necessary to remove widgets from the
display before activating another one.
1 Press the menu button.
2 Select Setup > Status line menu.
> Gateway Connection address between the local
network and other networks. The IP address
of the computer (router) on the network
through which the connection can be
established is used for this. The address of
the router can also be issued via DHCP. Off
> Network error Printer switches to Error mode when
problems with the network connection
occur. Off
Keyboard Setting of the keyboard layout when using
an external keyboard.
If keyboard is not connected, this option is
not available.
> Layout Country setting of the keyboard layout.
With the Automatic setting, the setting from
the menu Local settings > Country is used.
If keyboard is not connected, this option is
not available.
Automatic
> NumLock Activation or deactivation of the numerical
keypad on the keyboard.
If keyboard is not connected, this option is
not available.
On
Parameter Meaning Default