QuickLabel 482 Pronto! - Manual (Page 195)

Pronto! 482/486/682/863 11-11
Installing the printhead
1 Attach plug connections (2, 3).
2 Swing the adjustment elements (11) sidewards to uncover the slots (10) in
the printhead carriage.
3 Put in the printhead into the printhead carriage and swing down the
printhead assembly by hand and hold it.
4 Position the printhead in such a way that the threaded holes of the
printhead are centered into the slots (10) of the printhead carriage.
5 Swing back the adjustment elements (11) to the home position.
6 Insert and tighten the screws (6).
7 Reload labels and transfer ribbon (see Chapter 6: Loading media).
10 7 10 11
6
11 6