Rewinding onto 76 mm (3 in) cardboard core, Rewinding onto 76 mm (3 in) cardboard core -26 – QuickLabel 482 Pronto! User Manual
Page 116
Advertising
8-26
Accessories
Rewinding onto 76 mm (3 in) Cardboard Core
Note: First remove the spring from the rewind axle!
Consider that the cardboard core (3) should be about 1 mm (0.04 in) broader
than the label strip.
Warning! Risk of injury by rotating engine parts.
When switching on the Rewinder starts immediately and winds to the
material is tightened.
Advertising
This manual is related to the following products: