QuickLabel 482 Pronto! - Manual (Page 193)

Pronto! 482/486/682/863 11-9
Replacing the printhead on Pronto! 682/863
Replacing the printhead
The printhead of the label printer can be replaced without the need for fine
adjustment. The printhead must be replaced if worn or when switching to a
printhead with higher or lower resolution. For better differentiation, the print
heads have a label stating the printer type and resolution.
1 Head plate
2 Plug connection
3 Plug connection
4 Screw
5 Printing line
Caution: The printhead can be damaged by static electricity discharges and
impacts!
• Set up printer on a grounded, conductive surface.
• Ground your body, e.g. by wearing a grounded wristband.
• Do not touch contacts on the plug connections (2, 3).
• Do not touch printing line (5) with hard objects or your hands.
1
2
3
5
4
4