Teac DR-2D - Manual (Page 17)

TASCAM DR-2d
17
2–Names and Functions of Parts
Bottom panel
h Mono speaker
Use this built-in speaker to listen to recordings. Sound is
not output during recording, when the unit is in recording
standby, when headphones are connected, or input monitor
is activated.
j SPEAKER switch
Set this to ON to output sound from the built-in speaker.
NOTE
Even when ON, no sound is output during recording, in
recording standby, when headphones are connected, or input
monitor is activated.
k Tripod attachment screw-hole (1/4-inch)
Use this to attach the unit to a tripod or mic stand.
CAUTION
Tighten the unit securely to the tripod or mic stand to •
prevent it from falling off.
Place the tripod or mic stand on a level surface when using
•
it with this unit.
Some tripods use different types of screws, so it might
•
not be possible to attach the unit directly. In such a case,
purchase and use a suitable adapter.
l HOLD switch
Shift in the direction of the arrow to engage the hold
function, which prevents unintentional operation.
All keys are inoperative when hold is ON.
; Battery compartment cover