Teac DR-2D - Manual (Page 80)

80
TASCAM DR-2d
Message Meaning and response
Format Error
Format CARD The FAT formatting of the card is abnormal or broken. This message also appears if you FAT formatted
the card using a computer connected by USB and if a new card is inserted in the unit. Always use the
DR-2d to conduct FAT formatting of cards to be used with it. Change the card or press the ENTER/
MARK key when this message appears to format the card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the card.
File Not Found
Make Sys File The system file is missing. This unit requires a system file for operation. When this message appears,
press ENTER/MARK to automatically create a system file.
Invalid SysFile
Make Sys File The system file required to operate this unit is invalid. When this message appears, press ENTER/
MARK to automatically create a system file.
Invalid Card
Change Card Something might be wrong with the card. Change the card.
Protected Card
Change Card This appears when the card is protected and lacks the necessary Music Folder and other folders and
files. Unlock the write protect switch, restart the power and format the card.
Write Timeout Writing to the card timed out.
Backup files on the card to your computer, and format the card.
Card Full The card has no remaining capacity. Erase unnecessary files or move them to your computer to make
open space.
Layer too Deep Folders can be created down to two layers. You cannot create a new folder inside the current folder.
Can't Divide The position selected for divide is not suitable (too close to the beginning or end of a track).
Max File Size The file is larger than the designated size or the recording time exceeded 24 hours.
File Full The total number of folders and files exceeds 5000. Erase unnecessary files or move them to your
computer.
Card Error The card could not be handled properly. Replace the card.
Current File MP3 MP3 files cannot be divided.
11–Messages