Teac DR-2D - Manual (Page 83)

TASCAM DR-2d
83
12–Troubleshooting
If you are having trouble with the operation of this unit, please
try the following before seeking repair. If these measures do not
solve the problem, please contact the store where you bought
the unit or a TASCAM Service Center.
Power will not turn ON. ª
Confirm that the batteries are not dead. •
Confirm that the batteries are installed with the correct +/– •
orientation.
Confirm that the power plug of the AC adaptor (TASCAM
•
PS-P520: sold separately) is securely inserted.
The remote control does not function. ª
Confirm that a battery is installed in the remote control and •
that it is not dead.
The unit does not function. ª
Confirm that the •
HOLD switch is not set in the direction of
the arrow.
The SD card is not recognized. ª
Confirm that the SD card is inserted completely. •
Playback does not work. ª
If you are trying to play a WAV file, confirm that the •
sampling frequency is supported by this unit.
If you are trying to play an MP3 file, confirm that the bit rate
•
is supported by this unit.
No sound is output. ª
Are headphones connected? •
Is the • SPEAKER switch OFF?
Check the connections with the monitoring system. •
Is the volume of the monitoring system minimized? •
Is the OUTPUT LEVEL setting of the unit minimized? •
Recording does not work. ª
If you are using an external device, check the connection •
again.
Check the input settings again.
•
Confirm that the recording level is not too low. •
Confirm that the SD card is not full. •
Confirm that the number of files has not reached the •
maximum that the unit can handle.
The recording level is low. ª
Confirm that the input level setting is not too low. •
Confirm that the GAIN setting is not too low. •
Confirm that the output level of a connected external device •
is not too low.