Teac DR-2D - Manual (Page 79)

TASCAM DR-2d
79
The following is a list of the popup messages that might appear on the DR-2d under certain conditions. Refer to this list if one of
these popup messages appears and you want to check the meaning or determine a proper response.
Message Meaning and response
File Name ERR The DIVIDE function would cause the file name to exceed 200 characters. The DIVIDE function adds
"_a” or “_b” to the end of the file name. Before choosing the DIVIDE function, connect the unit to a
computer and edit the file name to less than 198 characters.
Dup File Name The DIVIDE function would cause the file name to be the same as that of an existing file. The DIVIDE
function adds "_a” or “_b” to the end of the file name. Before choosing the DIVIDE function, connect
the unit to a computer and edit the file name.
File Not Found The file added to the playlist cannot be found or a file could be damaged. Please check the file in
question.
Non-Supported The audio file is not a supported format. Please see "9–Connecting with a Computer" for file formats
that this unit can use.
Battery Empty The battery is almost out of power. Replace the AA batteries.
I/O Too Short The IN and OUT points are too close together. Reset the IN and OUT points with at least 1 second
between them.
File Not Found
PLAYLIST The file in the Playlist cannot be found. Please confirm that the file is still in the Music Folder.
No PLAYLIST No files have been added to the Playlist. Add a file to the Playlist or change the play mode to
something besides PLAYLIST.
PLAYLIST Full The playlist is full. You cannot add more than 99 tracks to the Playlist.
MBR Error Init
CARD The card is not formatted properly or the formatting is broken. Change the card or press the
ENTER/MARK key when this message appears to format the card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the card.
11–Messages