Teac DR-2D - Manual (Page 23)

TASCAM DR-2d
23
2–Names and Functions of Parts
When in recording standby, only the following menu items are
shown.
INPUT SETTING
AUTO REC
MONITOR
EFFECTOR
Using menus
Use the MENU screen to make various settings.
1 Press the MENU key to open the MENU screen.
2 Use the wheel to select a menu (selected items are
highlighted and appear as light letters on a dark back-
ground), and press the ENTER/MARK key to open a
setting screen.
Example:
REC SETTING
screen
3 Use the wheel to select (highlight) a setting item.
Example: setting the sampling frequency
4 Press the ¯ key (or the ENTER/MARK key) to select
the value of the setting.
Example: setting the sampling frequency
5 Use the wheel to change the setting.
6 To set a different item in the same menu, press the Â
key to select the item you want to set.
7 Repeat step 3 to 6 as necessary to set each item.