Teac DR-2D - Manual (Page 48)

48
TASCAM DR-2d
Mark function
Adding marks manually to a recording
You can manually add marks to a recording where you want
them.
Press the ENTER/MARK key while recording to add a
mark.
Mark number pop-up appears.
NOTE
A mark is automatically added when you restart recording •
after temporarily pausing.
Mark information is stored in the file with numbers
•
between 01–99. The maximum number of marks in a file
is 99.
Moving to a mark position
You can move to marks in the currently selected file when
paused and during playback.
You can use this function to identify points to create shortcuts to
the beginning of songs, for example.
Press the Â/¯ keys while pressing and holding the
ENTER/MARK key during playback or when stopped.
NOTE
You cannot move to a mark in a different file.
Recording the moment before pushing
RECORD (PRE REC)
By using prerecording, when the unit is in recording standby
you can record up to two seconds of the signal input before the
RECORD (º) button is pushed to start recording.
1 Press the MENU key to open the
MENU screen.
2 Use the wheel to select
REC SETTING
, and press the
ENTER/MARK key.
3 Use the wheel to select PRE REC and press the ¯ key
or ENTER/MARK key.
4–Recording