Teac DR-2D - Manual (Page 22)

22
TASCAM DR-2d
2–Names and Functions of Parts
: Auto gain control on
: Limiter on
6 Recorder operation status
ª Stopped
π Paused
º Recording
7 Recording level meters
When overdubbing is off, the input signal level is shown.
When over dubbing is on, the combined input and playback
signals are shown.
8 File name
The file name that will automatically be given to recorded
files is shown.
9 Input selection
Shows the input source.
0 Elapsed recording time
The elapsed recording time of the track appears as hours:
minutes: seconds.
During recording standby, the maximum remaining
recording time appears.
q Remaining recording time
The remaining recording time appears in hours: minutes:
seconds.
w Peak value in decibels (dB)
Peak recording level values are shown digitally.
e Recording mode/sampling frequency
Shows the recording file format and sampling frequency.
Menu item list
This list provides an overview of the various menu items.
Menu item Function Pages
INFORMATION Information about the file, SD card,
and system
73
BROWSE SD card file and folder operations 52
PLAYLIST Playlist editing 59
PLAY MODE Play area select and repeat setting 62
INPUT SETTING Input source select and input
settings
35
REC SETTING Recording mode settings 33
AUTO REC Auto recording settings 45
MONITOR Input monitor settings 41
METRONOME Metronome settings 70
DIVIDE Divide a file 50
EFFECTOR Effects settings 68
FILE NAME File name settings 77
SETUP System settings and format an SD
card
75
DATE/TIME Date and time settings 31