Teac DR-2D - Manual (Page 56)

56
TASCAM DR-2d
On the Home Screen, you can use the  and ¯ keys
to select the playback track. The files that you can select are
determined by the playback area setting.
Limiting the playback area makes track selection easier when
you have numerous recorded and copied tracks on the SD card.
On the Play Mode Screen, you can select all files, the current
folder or the playlist as the playback area. You can also use the
Browse Screen to set a folder as the playback area.
TIP
On the Browse Screen, regardless of the playback area setting,
you can select any file on the card that you want.
Adjusting playback volume
The volume output from the built-in speaker or the connector
can be adjusted by using the
OUTPUT LEVEL (+, –) keys.
The output volume level pop-up appears.
Setting the playback area (AREA)
Set the playback area for repeat and ordinary playback on the
PLAY MODE
screen.
1 Press the MENU key to open the Menu Screen.
2 Use the wheel to select PLAY MODE and press the ENTER/
MARK key.
PLAY MODE screen appears.
3 Use the wheel to select
AREA
and press the ¯ key or
ENTER/MARK key.
6–Playback