Teac DR-2D - Manual (Page 63)

TASCAM DR-2d
63
6–Playback
4 Set the REPEAT item to one of the following selections.
OFF
(default):
All tracks in the playback area are played in sequence one
time. (This setting is the ordinary playback mode.)
SINGLE :
The selected track is played once without repeating. The
icon appears on the Home Screen.
1 REPEAT :
The current track is played repeatedly. The icon
appears on the Home Screen.
ALL REPEAT :
All tracks in the selected playback area are played back
repeatedly. The
icon appears on the Home Screen.
NOTE
If you start loop playback, the REPEAT item automatically
switches to OFF if it is in a different mode.
5 Press the /HOME [ª] key to return to the Home
Screen.
Loop playback
With this function, you can continuously repeat (loop) the
playback of a selection that you make.
1 Press the I/O key during playback to set the point when
you want to start loop playback. The current position is
set as the IN point.
2 Press the I/O key at the point when you want loop
playback to stop. The current position is set as the OUT
point, and loop playback begins between the IN and OUT
points.
The current positions of the IN and OUT points are shown
by the and icons that appear below the playback
position display bar in the lower part of the Home Screen.
During loop playback the
indicator also appears.
To stop loop playback, press the • I/O key.
If you set one of the repeat mode, loop playback is canceled. •