Teac DR-2D - Manual (Page 31)

TASCAM DR-2d
31
Setting the date and time
Using its internal clock, this unit remembers the date and time
when a file is recorded.
1 Press the MENU key to open the
MENU screen.
2 Use the wheel to select DATE/TIME , and press the
ENTER/MARK key.
DATE/TIME
screen appears.
3 Use the Â/¯ keys to move the cursor, and use the
wheel to change values.
4 Press the ENTER/MARK key to confirm the change and
return to the MENU screen.
NOTE
You can set the unit to automatically add the date and time
to file names. (See “Setting the format of file names” on page
77.)
CAUTION
The date and time setting can only be maintained for a few
minutes when the unit is not powered by batteries or an
AC adaptor. When using batteries, we recommend that you
replace or recharge them before they completely lose power.
3–Preparation