Teac DR-2D - Manual (Page 28)

28
TASCAM DR-2d
NOTE
Operation distance varies according to the orientation of •
the remote control relative to the sensor.
If anything is between the remote control and the receiver,
•
operation might not work.
Precautions for use of the remote control
Remove the battery when you are not using the remote •
control for a long time (one month or more).
If the battery should leak, thoroughly clean any residue from
•
inside the battery compartment and install a new battery.
When using other devices controlled by infrared rays, use of
•
this remote control might operate these devices by mistake.
Start-up & shutdown
Starting up the unit
Press and hold the /HOME [ª] key on the left side panel
until TASCAM DR-2d appears on the display.
The Home Screen appears when the unit starts up.
Start -Up Screen
Home Screen
Shutting down
Press and hold the /HOME [ª] key until
LINEAR PCM
RECORDER appears on the display.
The power turns off after the unit completes its shutdown
process.
3–Preparation