Teac HS-20 - Manual (Page 107)

TASCAM HS-20
107
11 – Mark and locate functions
Editing mark positions
You can change the position (time) of marks added using the
MARK list (marks named “MARKXX”).
NOTE
Automatically placed marks cannot be edited.
1. Select the mark that you want to edit on the MARK LIST
screen.
2. Touch the EDIT TIME button to open the MARK EDIT screen.
Touch the FRAME EDIT button to set whether or not the
frame value can be edited.
FRAME EDIT on
FRAME EDIT off
3. Touch a number button to edit a mark. Use the DATA dial to
change the time for the selected number.
Touch the ENTER button to confirm the setting and return to
the MARK LIST screen.
o If you begin input without selecting a digit, input will start
from the smallest one.
o To input a specific digit, touch it to make its background
yellow, then use the number buttons or the DATA dial to
enter two digits at a time.
o Touch the CURRENT q button to copy the current
playback position to the input value.
o Touch the CLEAR button to clear all input values.
TIP
This can also be input using a connected keyboard.
Press the keyboard’s Enter key to confirm a setting and its
ESC key to clear all the values.
Editing mark names
1. Select the mark that you want to edit on the MARK LIST
screen.
2. Touch the EDIT NAME button to open the MARK NAME
screen.
Follow the same procedures as “Editing the name of a folder
in the root directory” on page 33.
NOTE
You can also open the MARK NAME screen by touching the
mark name area on the Home Screen.
However, since the names of automatic marks cannot be
edited, the MARK NAME screen will not open for them.