Teac HS-20 - Manual (Page 74)

74
TASCAM HS-20
9 – Playlist mode
Editing fade-in/fade-out length and level
1. Press the HOME key on the front panel to open the Home
screen.
2. Touch the ADJUST ENTRY button on the pull-down menu
that is opened by touching a file or title name button.
The ADJUST ### screen opens. (“###” is the entry number.)
3. Touch the Start TC Fade/Level tab to open the screen shown
below.
4. Select the Fade In, Fade Out or Level knob and use the DATA
dial to set the value.
Ranges
o Fade In/Out Length: 0 – 30 seconds
(0.1 second per step or 1.0 second per step when the dial
is pressed and rotated)
o Level: −∞ to +10dB
NOTE
• After the length of a fade is changed, the value will be
automatically adjusted to a value that will fit within the
playback Start/End time interval.
• The playback level is shown by a solid red line.
• The reference level (0 dB) is shown by a dotted orange line.
Rehearsal playback
You can use the transport controls for rehearsal playback while
on the ADJUST ENTRY screen.
o The operation is the same as during normal transport
operation except that the . and / keys are used to
jump to the entry's file beginning, Start Point, End Point
and file end.
o If you change the Start Point or Fade In Length, the
playback position will move to the Start Point. If you
change it during playback, playback will continue after
jumping to the new playback position.
o If you change the End Point or Fade Out Length, the
playback position will move as follows. If you change it
during playback, playback will continue after jumping to
the new playback position.
When PREVIEW
off
When PREVIEW on
When changing
End Point
Two seconds
before End Point
Two seconds before
Fade Out starts
When changing
Fade Out Length
Two seconds
before Fade Out
starts
Two seconds before
Fade Out starts
o Touch the PREVIEW button to change the contents of the
rehearsal playback.
Rehearsal playback when PREVIEW is off
o The original audio is played back without fade in/out or
level adjustments applied.
o You can move out of the Start/End Point range.
o When the End Point is reached during playback, playback
jumps back to the Start Point and stops.
Press the PLAY key to start playback from the Start Point.
Use the . key, / key, SHIFT + / key and the
JOG/SHUTTLE dial to move playback to after the End
Point.
Rehearsal playback when PREVIEW is on
o Only the interval between the Start Point and the End
Point is played back.
Locating to a point outside of that range is not possible.
o The audio is played back with fade in/out and level adjust-
ments applied.