Teac HS-20 - Manual (Page 53)

TASCAM HS-20
53
7 – Timeline mode
Removing set fades (Remove Fade IN/
Remove FadeOut)
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
3. Move the timeline cursor to the region where you want to
remove fade-in/out.
4. Touch the Fade/Level button to open the pull-up menu.
o To remove the fade-in, touch the Remove Fade IN button.
o To remove the fade out, touch the Remove FadeOut
button.
5. When fade removal is complete, the Home Screen will open
after a pop-up window is shown.
In this case, the Fade/Level pull-up menu will remain open.
Setting the playback level in the selected
region (Level)
You can set the playback level for a region (after fade-in and
before fade-out).
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
3. Move the timeline cursor to the region where you want to
change the playback level.
4. Touch the Fade/Level button to open the pull-up menu.
5. Touch the Level button on the pull-up menu.
The region at the timeline cursor is indicated in yellow, and
will be affected by the Level setting.
6 When the level knob is displayed above the Level button,
use the DATA dial to set playback level.
Setting range
−∞, −120dB to +10.0dB
7. Touch the Level button again to hide the level knob. (The set
playback level will be saved.)