Teac HS-20 - Manual (Page 66)

66
TASCAM HS-20
9 – Playlist mode
4. When a confirmation message pop-up appears, touch the
OK button or press the DATA dial to confirm the playlist
name.
While the playlist is being created, a progress status pop-up
appears.
When playlist creation completes, the pop-up disappears.
NOTE
• Immediately after a new playlist is created, it becomes the
current playlist (currently loaded playlist).
• A new playlist can also be created by touching the CREATE
PLAYLIST button on the pull-down menu that appears when
an entry name button is touched on the Home Screen.
• “C” (current) appears inside the icon of the currently
loaded playlist.
Changing a playlist name later
You can change playlist names later.
1. Press the FILE LIST key on the front of the unit to open the
playlist selection screen.
2. Select the playlist with the name that you want to change.
The background of the selected playlist name appears
yellow.
3. Touch the MENU button to open a pull-up menu.
4. Touch the EDIT NAME button in the pull-up menu to open
the PLAYLIST NAME screen.
NOTE
The EDIT NAME button in the pull-up menu cannot be
selected if the loaded playlist is selected.
5. Input the playlist name. Follow the procedures “Editing the
name of a folder in the root directory” on page 33.
6. Touch the Enter button on the PLAYLIST NAME screen or
press the DATA dial to confirm the playlist name and return
to the playlist selection screen.