Teac HS-20 - Manual (Page 25)

TASCAM HS-20
25
3 – Preparation
o If one of the keys around the display is pressed, the
following pop-up message appears when the display keys
are locked.
Display keys locked
• When Transport is set to LOCK, if one of the transport keys is
pressed, the following pop-up message appears.
Transport locked
• When REMOTE/KEYBOARD is set to LOCK, if a remote
control or keyboard connected to a remote connector is
used, the following pop-up message appears.
Remote/Keyboard locked
• When EXTERNAL CONTROL is set to LOCK, if an operation is
attempted using RS-232C, RS-422, PARALLEL or NETWORK
control, the following pop-up message appears.
External control locked
Recording times
This table below shows the total amount of recording time (in
hours and minutes) possible on SD/CF cards of various capac-
ities for each recording format.
File recording
format
Card capacity
8 GB
16 GB 32 GB
16-bit, 44.1kHz 12:34 25:10 50:21
16-bit, 48kHz 11:32 23:07 46:16
24-bit, 44.1kHz 8:22 16:46 33:34
24-bit, 48kHz 7:41 15:24 30:50
24-bit, 88.2kHz 4:11 8:23 16:47
24-bit, 96kHz 3:50 7:42 15:25
24-bit, 176.4kHz 2:05 4:11 8:23
24-bit, 192kHz 1:55 3:51 7:42
o The recording times shown above are estimates. They
might differ depending on the card in use.
o The recording times shown above are not continuous
recording times, but rather they are the total possible
recording times for the card.