Connecting to a vt220 session, Logging out of a remote host, Connecting to, vt220 – Visara 1783 User Manual
Page 101: Logging out of, vt220, Session, connecting to, Session, ending
Chapter 8: Using Telnet, TN3270, TN5250 and VT220
707042-002
8-25
Connecting to a VT220 session
VT220 will connect to the remote host. The host then will normally respond with a welcome
and will lead you through its log in process. Log in, employing one of the following
combinations:
• With the userid and password supplied by the administrator of the host
• With just a userid (some hosts do not require passwords)
• Neither, if the remote host has been set up for it.
To connect to a VT220 remote host from the main VT220 screen:
1. Click
Session
to open the VT220 Session menu.
2. Click
Connect
.
Once connected, use the menus, commands and features of the remote host to access and
run VT220 applications.
Logging out of a remote host
1. When you have finished using the remote host, use the host’s normal log out command.
2. To disconnect from the host, select
Disconnect
from the
Session
menu.