Lpr/lpd print feature, Configuring remote printers, Configuring – Visara 1783 User Manual
Page 37: Support
Chapter 5: Using print services
707042-002
5-7
LPR/LPD print feature
LPR (Line Print Remote)/LPD (Line Print Daemon) is a print server protocol widely
used on the internet for communicating between clients and servers. An LPR-enabled
device (the 1783, for instance) requests a LPD-enabled device (usually a printer or
print server) to print a specific print job. The 1783 can act as an LPR-enabled device
and/or an LPD-enabled device. Following are descriptions of how to configure the 1783
for LPR/LPD.
Remote Printing must be configured to enable LPR printing for the following 1783
applications:
• VT220
• 1480 Emulation
• TN3270E
• 1490 Emulation
• TN5250
• Voyager Web Browser
The 1783 supports a total of nine remote printers. Three of these printers are static-defined
and cannot be deleted. The remaining six are user-defined. The three static-defined printers
are:
• lan_hp
• lan_ps
• lan_epson
Configuring remote printers
From the Visara application menu, select
Remote Printers.
The Remote Printer
configuration panel is shown below: