Wavetronix Click 500 (programmable controller) (CLK-500) - User Guide - Manual (Page 103)

102 CHAPTER 10 • CLICK 513
The Click 513 compares the detected interval data to a set of predetermined speed, volume
and occupancy threshold values and activates a digital output when the data exceeds these
threshold values.
A possible application for the Click 513 is to alert traffic control operators of a congest-
ed exit ramp. If the interval data polled from the SmartSensor HD exceeds the threshold
value(s), the Click 513 will send an alert so that adjustments can be made to help clear the
congested roadway, such as keeping the traffic light green so cars can clear the exit ramp, or
displaying a message for drivers on a dynamaic message sign (DMS).
The Click 513 utilizes the Click Supervisor software for user configuration of vehicle speed,
volume and occupancy thresholds. Communication between the Click 513 and Click Su-
pervisor is easy to set up and use.
Physical Features
The Click 513 is based upon the Click 500 platform, so it has the same physical features as
the Click 500. The physical features are used for easy installation and configuration.
Figure 10.2 – Diagram of the Click 513
Communication Ports
The Click 513 has four communication ports: