Wavetronix Click 500 (programmable controller) (CLK-500) - User Guide - Manual (Page 119)

118 CHAPTER 11 • CLICK 514
CF device (www.acumeninstruments.com), which can be used to record several gigabytes
of data onto a compact flash card.
Click Supervisor is used to automatically setup the DataBridge SDR2-CF device and to
configure how frequently the data is segmented—daily, hourly or continuous. Communica-
tion between the Click 514 and Click Supervisor is easy to setup and use. The Click 514 also
performs time synchronization between the devices and converts SmartSensor HD UTC
timestamps into local time.
The Click 514 can also be used with software serial data logging devices such as HyperTer-
minal.
Physical Features
The Click 514 is based upon the Click 500 platform, so it has the same physical features as
the Click 500.
Figure 11.2 – Diagram of the Click 514
Communication Ports
The Click 514 provides four communication ports:
˽ RS-485 T-bus connection port
˽ RS-232 front DB-9 connection port