Physical features, Communication ports – Wavetronix Click 500 (programmable controller) (CLK-500) - User Guide User Manual
Page 70
CHAPTER 8 • CLICK 511
69
Physical Features
The Click 511 is based upon the Click 500 platform, so it has the same physical features as
the Click 500. The physical features are used for easy installation and configuration.
Figure 8.3 – Diagram of Click 511
Communication Ports
The Click 511 provides four interconnected communication ports:
˽
RS-485 T-bus connection port
˽
RS-232 front DB-9 connection port
˽
RS-232 top screw terminal connection port
˽
RS-485 top screw terminal connection/front RJ-11 jack connection port
Note
Any data on one port will be transmitted simultaneously on all other ports.
The back of the Click 511 features a 5-position connector that plugs into a T-bus connector
and provides power and RS-485 communication to the device. It also passes RS-485 com-
munication to all other devices on the T-bus. Usually, the RS-485 T-bus connection port is