Wavetronix Click 500 (programmable controller) (CLK-500) - User Guide - Manual (Page 36)

CHAPTER 5 • USING CLICK SUPERVISOR 35
To open a backup, select the Backups radio button in the lower righthand corner of the
screen. All the backups currently saved in the correct folder will appear (see Figure 5.6).
Select the backup you wish to open and click OK.
Figure 5.6 – Selecting a Backup
Note
The default folder to save backups in is C:\Program Files\Wavetronix\ClickHome\
Drivers\ [model number] \User. If you try to save the files elsewhere, the program will
still save them in the User folder.
After you’ve finished configuring a device, you can connect to another one by returning to
the Communication screen, closing the connection, and connecting to a different device.