Wavetronix Click 500 (programmable controller) (CLK-500) - User Guide - Manual (Page 68)

In this chapter
˽ Physical Features
˽ Installation
˽ Operating Modes
8
Click cabinet systems can use the Click 511 to monitor distributed digital outputs.
Figure 8.1 – The Click 511
One Click 511 can be configured as a base station server. The server polls other Click 511
devices configured as field station clients, and these field station clients report on the status
of their digital inputs. The communication messages are sent over a shared bus (e.g. Click
400 wireless 900 MHz link). To signal up to 8 outputs, the base station can be paired with
Click 511 —
Digital I/O Repeater
8