Menu, select the, Function. 6. the system asks whether to, Select – Grass Valley 1200 Installation User Manual
Page 132: The screen then displays, Reload your current e-mem and configuration files, Misc, Factory reset, Confirm, Cancel, Factory reset is in progress
4-18
Section 4 Ñ Maintenance
5. From the
MISC
menu, select the
FACTORY RESET
function.
6. The system asks whether to
CONFIRM
or
CANCEL
. Select
CONFIRM.
7. The 1200 system begins resetting the Model 1200 frame back to factory
default settings, and for approximately 18 seconds, the screen displays
FACTORY RESET is in progress...
The screen then displays
Factory reset completed.
Wait 5 seconds for
the frame to transmit the new switcher configuration to the control
panel.
8. You may now power down the Model 1200 control panel and signal
processor frame.
9. Open the control panel and locate the I/O board (064919). Refer to
Figure 4-8. Accessing the Software Installation Mode
10. Reload your current E-MEM and configuration files.
1
0
0
2
3
4
5
6
7
8
9
0
0
2
3
4
5
6
7
8
9
9
Software
Update
Operation
Normal
Menu
Operation
ON (1)/OFF (0)
Switch
I/O Board