Grass Valley 1200 Installation - Manual (Page 14)

xiv
Safeguards and Notices
North American Power Supply Cords
Each power cord for this equipment is supplied with a molded grounding
plug at one end and a molded grounding connector (IEC 320-C13) at the
other end. Conductors are color coded white (neutral), black (line), and
green or green/yellow (ground).
Operation of this equipment at voltages exceeding 130 VAC will require
power supply cords which comply with NEMA configurations.
International Power Supply Cord
Each power cord for this equipment is supplied with a molded grounding
connector (IEC 320-C13) at one end and stripped leads (50/5 mm) at the
other end. Conductors are CEE color coded, light blue (neutral), brown
(line) and green/yellow (ground). Other IEC 320 C-13 type power supply
cords can be used if they comply with the safety regulations of the country
in which they are installed.
White
Green or Green
with Yellow stripe
Black
Line
Neutral
Ground
(Earth)
NOTE: This U.S. cord
is for 110/125VAC Only.
If 220VAC, it has two hot
lines and no neutral.
Blue
Green with
Yellow stripe
Brown
Line
Neutral
Ground
(Earth)
NOTE: This International cord is for
Europe uses single or 3-phase 230 VAC,
BOTH 110 and 220VAC
one hot line and 1 neutral.